Our video section covers a wide range of signal converters, processors and generators for broadcast, corporate and presentation applications, plus a section on sending television locally via twisted pair (CAT-5) cable. Video routers and signal fail detectors are described separately in the Infomatics section...
 |
BL-100 - Safe Area Generator for all Standard and Widescreen TV & Film Formats Provides safe area cages and cutouts for 4:3, 14:9 and 16:9 |
|---|---|
 |
CADS Analogue > Digital & CDAS Digital > Analogue Converters CDAS and CADS modules offer high-quality conversion between component analogue video (YUV and RGB) and 270Mbits/second component serial digital (CCIR-601 / SMPTE 259) video, integrating digital and analogue production equipment in the broadcast signal chain. |
 |
DigiBox D2A - Low Cost SDI Demodulator for TV Monitor Use An extremely cost effective SDI to Generic Multi-format 10-Bit SDI to Analogue Video Converter designed for in-line mounting behind a TV monitor. Miniature 5Volt ultra reliable switch-mode PSU. |
 |
DigiBox MVC - Multi-Video Converter The DigiBox MVC Multi-Video Converter is a low-cost Decoder / Converter for Composite and S-Video signals with input selection from the 2x Composite and 2x S-Video sources. |
 |
DigiBox P2S / S2P - PAL-SECAM Colour Converters Allows perfect viewing of PAL & SECAM signal sources, available in four different models. |
 |
DigiBox PC2TV - VGA to Video Converter Converts VGA (resolutions up to 1600x1200) into a composite and S-Video signal. |
 |
The DigiBox QSD is a compact, low cost digital quad split unit. It has four SDI inputs with SDI and analogue (RGB or component) outputs as well as genlock functionality. Channel idents are also supported. |
 |
DigiBox RGBS - RGB to S-VHS/Composite Converter plus Stabiliser This compact RGB encoder is perfect for digital satellite receivers or DVD players which do not have a suitable S-Video output. |
 |
DigiBox SCV-1 - TV Standards Converter with Composite & S-Video In and Out The DigiBox SCV-1 provides Composite plus S-Video Input and Output plus a non-interlaced PC output for display at 60Hz. |
 |
DigiBox SCV-2 - TV Standards Converter with Composite In and Out The DigiBox SCV-2 provides Composite Input and Output and converts from NTSC 3.58, NTSC 4.43, PAL-B/G/I, PAL-M, PAL-N and SECAM with auto-selection, to NTSC 3.58, NTSC 4.43, PAL-B/G/I, PAL-M and PAL-N which is pushbutton-selectable. |
 |
DigiBox SCV-3 - TV Standards Converter Genlockable, Composite & S-Video In plus YUV & SECAM Out The DigiBox SCV-3 converts between all TV standards, from NTSC 3.58, NTSC 4.43, PAL-B/G/I, PAL-M, PAL-N and SECAM to NTSC 3.58, NTSC 4.43, PAL-B/G/I, PAL-M, PAL-N and SECAM. |
 |
DigiBox TBC - Timebase Corrector Make copies of your video without noticeable signal loss or noise. Now you can correct and unstable video source before you make copies. |
 |
DigiBox TBC-HQ - Studio Quality Timebase Corrector A high-resolution, low-noise, wide-bandwidth Time Base Corrector (TBC) that Gen-locks any two video sources for synchronous effects. |
 |
DigiBox TV2PC/HD - High Quality Video Scaler Ideal for improving the picture quality of high resolution plasma / LCD screens or for displaying a standard TV / DVD signal on a VGA screen, the Digibox TV2PC/HD scaler has both VGA and HDTV outputs. |
 |
DigiBox V2D - Composite / S-Video to SDI Convertor The DigiBox V2D converts analogue composite or S-Video signals into serial digital video (SDI) at 270Mb/s. Both 625/50 (PAL) and 525/60 (NTSC) are supported (auto detection). |
 |
DigiBox Y2D - Component to SDI Convertor The DigiBox Y2D converts analogue component signals into serial digital video (SDI) at 270Mb/s. Both 625/50 (PAL) and 525/60 (NTSC) are supported (auto detection). |
 |
DigiBox-AE/A & DigiBox-AE/D - SDI Embedders for Analogue and Digital Audio DigiBox-AE/A and DigiBox-AE/D full broadcast specification SDI Audio Embedders embed analogue or AES-EBU audio into an SDI 270Mb/s SDI signal in audio groups 1,2,3 or 4. They are completely self-contained and incorporate high quality audio analogue to digital converters. |
 |
Digibox-AX/A & Digibox-AX/DA - SDI Audio extractors The DigiBox-AX/A and DigiBox-AX/DA are full broadcast specification SDI Audio Extractors. The DigiBox-AX/A allows extraction (de-embedding) and conversion of one AES/EBU signal from the eight potentially embedded within the ancillary data space of an SDI signal. |
 |
Digibox-D2VA - Serial video to composite with analogue audio extratctor The Digibox-D2VA allows extraction (de-embedding) and conversion of one AES/EBU signal from the eight potentially embedded within the ancillary data space of an SDI signal. |
 |
DigiBox-VA2D - Composite Video & Analogue Audio SDI Converter / Embedder The DigiBox-VA2D converts analogue composite video plus stereo audio to full-broadcast specification embedded SDI Serial Digital Video |
 |
EasyMix-HD - HD A/B Video Mixer The EasyMix-HD A/B Video Mixer is part of a new family of low-cost modular HD/SD products that all fit into a 1-U rack-frame system. The HD-RK4 rack has relay bypass in case of mains failure, making them suitable for on-air and broadcast use. EasyMix boards can be used in systems with HD-LOGO Logo Generator/Inserters and HD-DSK Downstream linear keyers with up to 4 cards housed in a single 1-U rackframe. |
 |
FiberLink - Composite Video Family Fiberlink® is an extensive collection of Fibre-Optic transmission products that support video, audio and data signals. This part of the range sends Composite Video - with or without Audio and/or Data - over Single-Mode or Multi-Mode Fibre. |
 |
FiberLink - Switchers, Rack Systems and Accessories Fiberlink® is an extensive collection of Fibre-Optic transmission products that support video, audio and data signals. The range also includes a configurable Fibre Optic Switcher, Modular Rack System for multi-channel operation plus other useful Fibre Optic add-ons and Accessories. |
 |
FiberLink - 3G / HD / SD-SDI Digital Video Family Fiberlink® is an extensive collection of Fibre-Optic transmission products that support video, audio and data signals. This part of the range sends Serial Digital Video - SD / HD and 3G - with or without Embedded or Digital Audio - over Single-Mode or Multi-Mode Fibre. |
 |
FiberLink - VGA / DVI Computer Video Family Fiberlink® is an extensive collection of Fibre-Optic transmission products that support video, audio and data signals. This part of the range sends DVI and VGA computer signals - with or without Audio and/or Data - over Single-Mode or Multi-Mode Fibre. |
 |
FiberLink - Component and S-Video Family Fiberlink® is an extensive collection of Fibre-Optic transmission products that support video, audio and data signals. This part of the range sends Component and S-Video - with or without Audio and/or Data - over Single-Mode or Multi-Mode Fibre. |
 |
FiberLink - Professional Audio-Only and Data-Only Products Fiberlink® is an extensive collection of Fibre-Optic transmission products that support video, audio and data signals. This part of the range sends Professional Analogue or Digital audio Only or Data Only - over Single-Mode or Multi-Mode Fibre. |
 |
The HD-DSK is a high definition downstream keyer. Each channel provides fill, key, background and preview inputs with two programs and one preview output. It will operate with all current HD and SD standards and provides a linear keying, as well as cut and fade transitions. A single keyboard can control up to 18 boards at one time. |
 |
HD-LOGO - SD/HD Logo Generator HD-LOGO is a 4 layer SD/HD logo generator board with built-in keyer. Each of the four channels provide static or animated logos. Logos are uploaded via the Ethernet port in BMP or TGA formats.HD-LOGO can be fitted in a rack frame that comes with automatic bypass capability as standard and can host up to four boards in only 1U. This rack frame can also be fitted with HD-EASYMIX and HD-DSK boards |
 |
HS-2 Hum-Stop - Hum Eliminator The HS-2 Hum-Stop is a custom-wound "hum-bucking" coil intended to reduce the level of mains hum acquired by video cables linking areas or buildings with differing earth potentials, and in any situation where long video cables (over 5 metres) pick up induced mains hum. |
 |
Kronoss - Clocks, logos, texts and graphics generator. Kronoss generators insert Analog and Digital style Clocks, Animated Logos, Texts and live Video into Serial Digital Video. Positioning, rotation and resizing are processed in Real-Time. |
 |
LG50 - Broadcast Quality Cost Effective Logo Generator, with Built in Keyer. Broadcast logo generator with static or animated logos. |
 |
LGA200 - Animated Digital Logo Generator. PAL/NTSC logo generator with built in keyer, Digital logo generator without built in keyer or Digital logo generator with built in Keyer and 1H autophasing. |
 |
The MKR200 fits into any configuration that needs to key titles, graphics or logos, in the digital broadcast area, i.e, production, post-production, O.B. Vans, satellite, transmission... |
 |
MX-AIR has been designed to cope with all your needs of mixing video and audio. Housed in a robust and compact frame, it can process embedded or AES/EBU audio and 4:3 or 16:9 video SDI. |
 |
PBE-301 Receiver - Composite Video & Stereo Audio The PBE-301R Receiver operates with either the PBE-301S single channel driver or the PBE316 multi-channel driver and provides baseband composite video and stereo audio for connection to a local television/monitor. |
 |
PBE-301 Sender - Composite Video & Stereo Audio The PBE-301S(C) driver transmits signals over CAT-5 cable to the PBE-301R receiver, which converts them to baseband video and stereo audio for display on a television/monitor. |
 |
PBE-303SR - Passive Balun for Composite Video and Stereo Audio The PBE-303SR Balun operates with either itself an a sender, the PBE-301S single channel driver or the PBE316 multi-channel driver and provides baseband composite video and stereo audio for connection to a local television/monitor. |
 |
PBE-316 Distribution System - Composite Video & Stereo Audio The PBE-316 accepts 16 video and stereo audio sources for distribution to up to 12 PBE-301R receivers. Racks can be cascaded to provide additional destinations. The PBE-316 can also be configured for multi-channel point-to-point operation. |
 |
PBE-632 Distribution System - Composite Video & Stereo Audio The PBE-632 accepts 32 video and stereo audio sources for distribution to up to 12 PBE-301R receivers. Racks can be cascaded to provide additional destinations. The PBE-632 can also be configured for multi-channel point-to-point operation. |
 |
PBE-822 - High Definition Component Video + Audio Balun Send High Definition Component Video and Audio signals on UTP at distances of up to 500 ft |
 |
Sends HD component with data + IR and audio distances upto about 150m (500 ft approx). |
 |
PBE-840 Series - Baseband video baluns Baluns for security cameras, video conferencing and other baseband video applications. |
 |
PBE-850SR - ULTRA Broadband Video Baluns for sending/receiving RF/Cable/Satellite over CAT-5 Transport ALL CATV spectrum video signals over UTP |
 |
The PBE-890 Series of RGB Video Baluns provides you with the ability to send RGB video over standard telecom wiring (UTP) |
 |
PBE-902 - S-Video + Stereo Audio Balun S-Video (Y/C baseband) channel and 2 audio channels on one run of UTP |
 |
PBE-920 - Component Video Baluns Send Component Video signals on UTP at distances of up to 600 meters. Component video formats include RGB, YUV, YIQ and YCrCb. |
 |
The PBE-930 VGA Video Balun Set allows computer video signals that adhere to the VGA/ SVGA/XVGA standards to be transmitted over Category 5 or better UTP wiring. |
 |
PBE-937/2 - Active VGA Dual Set The PBE-937-2 Active VGA Set, Dual Output is based on the solid foundation of our Passive VGA balun series. This first product in the Active VGA line allows signals to be sent from a computer over a single 4 pair UTP run at distances of over 100 meters. |
 |
PBE-980 - Sends XGA plus audio over structured cable Send XGA plus audio on UTP/STP distances up to 100+ metres with splitter at sending end and dual outputs. |
 |
Provides interface to allow the use of IP cameras over legacy coax installations. |
 |
PBE-SDI - Serial Digital Video Media Converter for SDI Video CAT-5 The PBE-SDI Serial Digital Video Media Converter is designed to run SMPTE 259M video signals over high performance UTP (Cat5e or better). |
 |
PBE-Tuner - Outputs to LCD/PLASMA/CRT Monitors and converts them to a TV PBE-Tuner outputs to LCD/PLASMA/CRT Monitors and converts them to a TV |
 |
Q-Channel Quad Split - Analogue - Combines four colour images onto one video signal. Ideal for all video security systems, this economical real-time colour quad processor will display four different video pictures at the same time on one TV monitor. Dual outputs are supplied, allowing you to record the signal on a VCR and monitor at the same time. |
 |
Displays four SDI images on a DVI or SDI or analog video output with audio monitoring capability and multi output screen configuration. |
 |
Scan Do HD - Broadcast Quality HD/SD Scan Convertor The SCAN-DO/HD allows computer-generated content such as websites, online videos or computer games to be broadcast at a wide range of HD and SD resolutions. It incorporates extensive scaling, positioning and video processing functions. |
 |
Scan Do Pro II - Broadcast Quality SD Scan Convertor The Scan Do Pro II provides broadcast-quality scan conversion of computer resolutions up to 1280x1024 @ 60 Hz to NTSC and PAL video. It features fully timeable genlock with horizontal and subcarrier phasing and offers composite, Y/C and component outputs. Ideal for On-air Web Broadcasts, Computer Generated Graphics, Weather Maps and Radar, Post-production, Presentation Staging, Multimedia Events and Videoconferencing. |
 |
Scan Do Select - VGA to Composite / S-Video Scan Convertor The Scan Do Select is a high quality, affordable scan converter with VGA and MAC computer Inputs and analogue video Outputs (Composite and S-Video). It is ideal for online video straming, distance learning, Videoconferencing, Post-Production, Presentation staging and Multi-Media events. |
 |
SPG-100HD - Master Video and Audio Sync Generator The SPG-100HD is a Genlock Master Sync Generator especially designed to cater for all SD/HD video & digital audio reference requirements within the broadcast, film & post-production industries |
 |
TPS-01 - Broadcast PAL > SECAM Transcoder The TPS-01 PAL to SECAM Broadcast Transcoder offers high quality conversion from 625 line / 50Hz PAL to 625 line / 50Hz SECAM (SECAM - IIIB/D/G/K/K1/L). |
 |
TPS-100 - High Grade Broadcast PAL > SECAM Transcoder The TPS-100 transcoder is a high grade broadcast PAL to SECAM composite / YC video converter designed for the television studio. |
 |
TSP-06 - Broadcast SECAM > PAL Transcoder The TSP-06 SECAM to PAL Broadcast Transcoder offers high quality conversion from 625 line / 50Hz SECAM (SECAM - IIIB/D/G/K/K1/L) to 625 line / 50Hz PAL (PAL - B/C/G/H/I). |
 |
TSP-100 - High Grade Broadcast SECAM > PAL Transcoder The TSP-100 transcoder is a high grade broadcast SECAM to PAL composite video converter designed for the television studio. |
 |
V-50/KCT - Stand alone video character generator Works with a standard PC keyboard to add titles and captions to your video. |
 |
V-50/SCT - Stand Alone or Computer Controlled "Industrial" Character Generator Adds titles, source ID, time-date and automatic time-synchronized captions. |
 |
VX-BB6/PN - Black-Burst Generator The VX-BB6 Black and Burst generator is a stand-alone, low-cost source of black and burst colour video. |
