![]() |
|
|
|
| Home | About Vortex | Product Catalogue | Spec Sheets | How to Buy | Contact Us |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
VX-8500 Video and Audio Matrix Routing Switchers use the latest technology to provide excellent performance at low cost. They combine a good choice of matrix sizes and switching levels with wide-ranging control options, and are housed in ultra-slim rackmounting cases. Video signals up to 200MHz and audio up to 50kHz can be routed, easily surpassing broadcast requirements and the demands of computer-generated video presentations. Switching takes place in the vertical interval, with audio follow video... |
|||||
|
|||||
|
|||||
| SDI 8x8 Serial Digital Interface Routing Switcher.
Input Equalization
Applications:
|
|
|||||
The SDI8x8 matrix routing switcher accepts and reclocks up to 8 sources to 8 destinations of 8 or 10-bit serial digital video with or without embedded audio. Housed in the Knox 3U ultra-thin profile chassis, these SDI routers are compatible with various SDI standards including ITU601, SMPTE259M, D1, D2, and D3 at data rates of 143, 177, 270 and 360 Mbps with input equalization in excess of 200 meters. SDI routing switchers are controlled from either the front panel pushbuttons or via the RS232 port. Front panel LEDs confirm valid data locking at all times. Each valid SDI input signal is indicated by an “Input Carrier Detect” LED. For each output with a valid input signal, another LED indicates one of four data rates. Crosspoint patterns may be stored for later recall. All current and stored patterns are backed up in non-volatile memory. For more details on the SDI 8x8 Serial Digital Interface Routing Switcher Click Here... |
||||||
|
||||||
High performance 1 or 2 output Routing Switchers.
Applications:
The VX8500 series vertical interval routing switchers are high-performance audio/video units in thin profile 3RU rackmount chassis. They are configured for 16, 12, 8, or 4 sources to either 1 or 2 destinations. |
![]() ![]() |
|||||
They are active switchers that accept and route almost any 1 volt NTSC/PAL, RGB, RGBS, RGBHV video source including off-the-air and non-timebase corrected signals. The VX8500 accepts and routes mono or stereo unbalanced audio up to 2 volts p-p. Video and audio sources can be routed independently; they need not have the same destinations. Easy manual operation from front panel push-buttons or routing commands can be sent from a computer via RS232 interface. …. Also available in 5-channel version for RGBHV and VGA routing.
For more details on the High performance 1 or 2 output Routing Switchers Click Here...
|
||||||
|
||||||
VX8500 4x4HB High Performance Full Matrix Routing Switcher
Applications:
|
|
|||||
The VX8500 4x4HB is a high performance audio/video routing switcher in a thin profile 2RU rackmount chassis. It accepts and routes almost any 1 volt Composite, Y/C, or Component video input including off-the-air and non-timebase corrected signals. The VX8500 4x4HB accepts and routes mono or stereo unbalanced audio up to 2 volts p-p or balanced stereo audio from 0 to +18 dbm. Video and audio inputs can be routed independently; they need not have the same destination.Each source may be routed to multiple destinations via easy-to-use front panel push buttons or via RS232 interface. Front panel LED's indicate current routed crosspoints.Battery backed-up memory stores up to four preset patterns. An internal timer allows timed sequence of patterns. Housed in a super thin profile package, the VX8500 4x4HB is one of the VX8500 family of full matrix routing switchers. Also shown are the VX8500 16x16HB, and VX8500 8x8HB. For more details on the VX8500 4x4HB High Performance Full Matrix Routing Switcher Click Here... |
||||||
|
||||||
VX8500 8x8HB High Performance Full Matrix Routing Switcher
Applications:
|
|
|||||
The VX8500 8x8HB is a high performance audio/video routing switcher in a thin profile 3-unit rackmount chassis. It accepts and routes almost any 1 volt Composite, Y/C, or Component video input including off-the-air and non-timebase corrected signals. The VX85008x8HB accepts and routes mono or stereo unbalanced audio up to 2 volts p-p or balanced stereo audio from 0 to +18 dbm. Video and audio inputs can be routed independently; they need not have the same destinations.Easy manual operation by front panel push buttons, or send routing commands from a terminal or computer to RS232 interface.Battery backed-up memory stores up to eight different studio patterns.Internal timer allows timed sequence of patterns for surveillance applications. Housed in a super thin profile package, the VX85008x8HB is one of the VX8500 family of full matrix routing switchers. Also shown are the VX850016x16HB, and VX85004x4HB. For more details on the VX8500 8x8HB High Performance Full Matrix Routing Switcher Click Here... |
||||||
|
||||||
|
VX8500 16x16HB High Performance Full Matrix Routing Switcher
Applications:
The VX850016x16HB is a high performance audio/video routing switcher in a thin profile 6-unit rackmount chassis. It accepts and routes almost any 1 volt Composite, Y/C, or Component video input including off-the-air and non-timebase corrected signals. The VX850016x16HB accepts and routes mono or stereo unbalanced audio up to 2 volts p-p or balanced stereo audio from 0 to +18 dbm. Video and audio inputs can be routed independently; they need not have the same destinations. |
![]() ![]() |
|||||
|
Easy manual operation by front panel key pad, or send routing commands from a terminal or computer to RS232 interface.Housed in a super thin profile package, the VX850016x16HB is one of the VX8500 family of full matrix routing switchers. Also shown are the VX8500 8x8HB, and VX85004x4HB For more details on the VX8500 16x16HB High Performance Full Matrix Routing Switcher Click Here... |
||||||
|
|
Last Updated |