Vortex Communications is pleased to be able to exclusively offer a new line of telephone interface products which have just become available in the European marketplace.

Get Audio in & out of:

• Analogue Phones
• PBX Systems
• Mobile Phones

Be completely Prepared! Pick up this new handheld road tool to get audio in an out of analogue phone lines, PBX systems, even cell phones. Perfect for Remote Broadcasts, IFB feeds, or interviews over any phone connection.

• XLR input (mic/line switch)
• 3.5 mm line input
• ¼" headphone jack
• Works with conventional phone lines
• Works with analogue and digital PBX or ISDN phones
• XLR phone mix output switches to intercom link
• Transmit clip LED
• Battery test LED
• Keypad lockout switch
• Runs 20 hours on one 9 volt battery

For more details on ComPack Click Here...

Daptor Two - Mobile Phone Audio Interface by JK Audio

Remote Broadcasts over a cell phone?
Simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. You can now send and receive audio from your mixer or tape recorder through the cell phone.

Your cell phone will recognize Daptor Two as a headset which will disable the mic and speaker in the cell phone.

• XLR and ¼" in and out
• Passive, no AC or battery power needed.
• Rugged diecast aluminium construction.

For more details on Daptor Two Click Here...

Connect THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-2 is used by radio stations to record and play sound bytes, and by TV and film sound crews to get IFB dialog over phone lines.

Simply unplug the handset coily cord form the base of your telephone and plug it directly into the THAT-2. Then, using the supplied cable, connect the THAT-2 back to the telephone.

• Works with analogue, digital, PBX, and ISDN telephones
• RCA and XLR line in and out
• Switch selects between carbon, dynamic or electret handset types
• No battery or AC adapter needed
• Durable diecast aluminium construction

For more details on THAT-2 Click Here...

CellTap - Mobile Phone Audio Tap by JK Audio

Need to record your cell conversations?
Connect CellTap between the 2.5 mm earpiece jack of your cell phone and your earpiece or headset. Now connect a tape recorder or powered speakers to the 3.5 mm mini jack. This audio output contains a nice mix of both sides of the conversation. CellTap works with any wireless phone that accepts a third party headset or earpiece.

• 3.5mm audio output
• Passive, no AC or battery power needed.
• Rugged diecast Aluminium

For more details on CellTap Click Here...

RemoteAmp - Headphone/Earpiece Amplifier by JK Audio

The RemoteAmp is a simple battery-powered personal headphone amplifier.

Use the RemoteAmp as an IFB earpiece or headphone amplifier, or as an on-stage monitor headphone amplifier. This low-distortion, 1 watt amplifier will cut through the crowd noise without distortion.

• 1/4" 8 ohm headphone jack
• 1/8" 150 ohm earpiece jack
• Battery test indicator
• Easy change battery compartment
• Durable diecast aluminium construction
• Stainless steel belt clip

For more details on RemoteAmp Click here...

Pureformer - Stereo Isolation Transformer by JK Audio

The Pureformer provides hum and noise reduction for sound cards and audio equipment, and removes ground loops and DC paths that can cause hum and signal breakup.

The Pureformer completely isolates the electrical ground of the two systems and only allows audio signals to pass through. Pureformer cannot remove noise once it has been mixed with the audio signal, so it is important to find and treat the source of each problem.

• Just insert between your sound card and your audio mixer or amplifier

• High-quality, low-distortion, 600 ohm audio transformers

• Durable diecast aluminium construction

For more details on Pureformer Click Here...

TCB1&2 - Telephone Couplers

Comrex Auto-Answer and Manual Telephone Couplers provide clean, transparent transformer connections from telephone lines to external audio equipment. State of the art circuits and rugged construction assure highest quality and years of reliable service. Both couplers feature modular jacks for quick installation by non-technical personnel. Comrex Telepone Couplers are designed and FCC registered specifically for broadcast use. Program may either be sent or received on both the auto-answer or manual models.

For more details on Telephone Couplers Click Here...

Last Updated