Home About Vortex Product Catalogue Spec Sheets How to Buy Contact Us
 
  Go To Video Go To Audio Go To Infomatics Go To Time Go To Applications  
Back

Top
Specifications FAQ's Download Spec Sheet Download User Guide
RemoteAmp - Headphone/Earpiece Amplifier by JK Audio

The RemoteAmp is a simple battery-powered personal headphone amplifier.

Use the RemoteAmp as an IFB earpiece or headphone amplifier, or as an on-stage monitor headphone amplifier. This low-distortion, 1 watt amplifier will cut through the crowd noise without distortion.

The RemoteAmp clips to your belt and accepts a 3-pin XLR audio input from a mixer, distribution amplifier, telephone line hybrid, or a handset interface like our QuickTap IFB. You’ll like the convenience features, such as the separate power switch, which allows you to leave the volume control set at a comfortable level.
 

Specifications
Inputs: XLR female, 4000 ohms, 100 mV RMS nominal (+12 dBm maximum) 46 dB maximum gain.
Outputs: 1/8" mono 150 ohms, 100 milliwatts nominal.
Size: 5.1 x 2.7 x 1.3 inch (13 x 6.9 x 3.3 cm)

Weight:

10 ounces 
FAQ's

?

 Will the RemoteAmp work with my QuickTap IFB?

!

 Yes. The RemoteAmp will take the balanced output from the QuickTap IFB and send it to a 1/4" headphone jack as well as a 3.5 mm mini jack. You can now use headphones, an earpiece or both.

?

 Can I get more gain out of my RemoteAmp?

!

 Yes. Take the back off of the RemoteAmp. You will find a jumper which will give you enough gain to boost a healthy microphone level signal to headphone level output.

Last Updated