Home About Vortex Product Catalogue Spec Sheets How to Buy Contact Us
 
  Go To Video Go To Audio Go To Infomatics Go To Time Go To Applications  

Back

Top


Specifications FAQ's Download Spec Sheet Download User Guide

ComPack - Universal Telephone Audio Interface by JK Audio

Be completely Prepared! Pick up this new handheld road tool to get audio in an out of analog phone lines, PBX systems, even cell phones. Perfect for Remote Broadcasts, IFB feeds, or interviews over any phone connection.

Cell Phones: Simply plug ComPack into the 2.5 mm headset jack of your wireless cell phone. (We will provide adapters for all phones which do not have a 2.5mm jack) Your phone will recognize ComPack as a headset which will disable the mic and speaker in the phone.

PBX Systems: Unplug the handset from any analog or digital PBX phone and plug the coily cord into ComPack. You can now send and receive audio through the PBX telephone set.

Analog Phones: Plug ComPack into an RJ-11 jack, go off-hook and dial, or answer an incoming call.

ComPack also functions as a simple telecom interface for your beltpack intercom system. This no-frills feature allows you to connect the 3 pin male XLR to your beltpack intercom group. This provides a full duplex, always-on connection to any telephone network.

The ComPack cell phone interface was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into this 2.5mm jack.
 



Specifications
Inputs: Female XLR, 1k ohm, -10 mV RMS (-35 dBm nom) mic, +5 dBm line
3.5 mm line input, 20k ohms, -10 dBm RMS
Outputs: Male XLR
Line Output: 600 ohms balanced phone mix output.
Intercom mode: Pin 3 bidirectional unbalanced.
Headphone: ¼" stereo, 8 ohms, 500 mW

Phone Line RJ11C
Isolation 1500 VAC
Ringer LED 0.9B REN
Keypad DTMF

PBX Handset interface simulates electret, dynamic, and carbon handset microphone types.

Wireless phone: 36" cable provided with 2.5 mm, 3 conductor headset plug.

Size: 8" x 3" x 2.2" (20.3 x 7.6 x 5.6 cm)

Weight:

1.5 pounds

FAQ's

?

How can I record my conversation?

!

The male XLR, in "Line Out" mode provides a nice mix of both sides of the conversation.

?

How do I select which telephone interface I will be using (phone line, PBX, or wireless)?

!

Actually, all three connections are live all the time. Technically, you could connect to all three at once, but since there is no way to equalize levels, this "conference call" might not be the best quality connection.

?

Will ComPack work with my model ____ cell phone?

!

As long as your wireless phone has a 2.5 mm earpiece jack and accepts a generic 3rd party earpiece or headset, you should be OK.  If your phone does not have a 2.5mm Jack Vortex will provide you with an adapter.

?

Can I talk on my handheld phone and record the conversation using ComPack?

!

No, most phones detect the presence of anything plugged into the headset jack and immediately disable the phones microphone and speaker.

?

What if my phone does not have a 2.5 mm earpiece / headset jack?

!

Vortex will provide you with an adapter for your model phone to a 2.5mm jack.

?

Can I send and receive audio at the same time?

!

Yes, but whatever audio you send into the ComPack will come back mixed with the caller audio.

?

What is the Com Link used for?

!

Simply slide the Male XLR function switch to Com Link and you can connect the ComPack Male XLR to your single channel belt pack intercom system.

?

Will ComPack work with my intercom?

!

While we've tested ComPack with ClearCom, RTS and Telex Audiocom single channel party line belt packs with excellent results, we do not have endorsements from any of these manufacturers.



Last Updated